You can customize the product specifications you like according to your needs Customizable range: sensor type/line length/quick connector.
Detailed online installation tutorial.
You can conduct online technical consultation or use Q&A with our engineering staff by email.
Auto switch matching cylinder chart.
A magnetic switch can replace icon.
If the product is damaged when received, we promise to replace it for you free of charge (only in China)
(If the product is damaged due to human error, you cannot enjoy the free replacement service).
If you encounter any difficulties in use, please contact us as soon as possible, we will serve you wholeheartedly.
1. Loosen the screws on the steel strap upwards.
2. Leave 3 to 4 turns of screw teeth on the lower end of the screw in the nut.
1. Pass the fixing steel strip through the via hole at the bottom of the sensor or Place the screw head in the screw slot of the collet.
3. Pass the steel belt around the cylinder and tighten the steel belt.
4. Make a mark on the round hole of the nearest PIN on the steel strip.
1. Loosen the steel belt.
2. Cut the steel strip at the positions of the two holes after the marked holes.
1. Insert the cut strip into the strip slot in the collet.
2. Put the marked hole on the collet PIN.
3. Use your thumb to push down the steel strip along the collet to bend the steel strip.
4. Assemble the switch and the cylinder as shown in the figure, adjust the switch sensing position, and tighten the screws to fix it.
Cersell Company Inc information:
Phone: +1 (484) 753-2655
Address: Oakland Corporate Center, 100 Woodledge Lane, Exton, PA 19341
ALIF is a professional cylinder sensor factory, they are well known to customers for their comprehensive products, good quality, and reasonable prices.